Home About Us Repairs Service Sales Coverage Contact

Rapid Fitness Solutions, Gym Equipment SERVICING in Sussex, Kent, Surrey and London, UK.

Rapid Fitness Services can be provided on a Time and Materials basis, or with one of our Service contracts tailored to meet your individual needs.

Regular Servicing is extremely important as it can prevent breakdowns and the inconvenience of machines being out of order. This is a much more cost effective and professional way to run your facility, increasing customer retention and reducing the costs of expensive major fault repair or machine replacement.

SERVICE

NON-CONTRACT

If you chose to have your equipment serviced we would quote for the work depending on number & type of machines. Should you choose to go ahead we would arrange a convenient time for our Engineer to do the Service as described below. You would then receive a written report giving details of any recommendations.

CONTRACT

If you choose one of our service contracts you will get either one or two services per annum, depending which option you choose, included in the cost of the contract. You will also be guaranteed a 24 hour response to callouts on weekdays and a cheaper callout and labour rate. We also endeavour to provide a designated engineer to ensure familiarity with your site, staff & equipment.

 

 
The 20 Point Detailed Preventative Maintenance Check below is carried out by our engineers on ALL Annual Service Visits:
       
  1. Remove covers, clean and vacuum out interiors.
  2. Remove dirt and debris from motors, vents and circuit boards.
  3. Inspect wire harnesses and connections.
  4. Lube all chains, bearings, bushings, rollers, pulleys and pivots.
  5. Sand build up corrosion from motor flywheels and rollers (where applicable).
  6. Check condition of motor commutator and brushes (clean motor commutator where applicable).
  7. Check condition of alternators (where applicable).
  8. Check condition and align of all drive belts, chains and cables.
  9. Align and tighten walking belt.
  10. Lubricate belt and deck.
  11. Inspect condition of all bearings and bushings.
  12. Inspect all other parts for wear and function.
  13. Tighten loose crank arms, belts and pulleys.
  14. Check calibration of elevation sensors, re calibrate if necessary.
  15. Grease drive assemblies and elevation drive systems.
  16. Check machine function and operation.
  17. Clean exterior with polish / sealer.
  18. Run amp / friction tests to test wear on belts and decks.
  19. Clean and check speed sensors.
  20. Complete audible inspection of motor, crank and roller bearings.